Viking E-60-PB Entry Phone

Viking
Enhanced Weather Protection
Viking E-60-PB Entry Phone (E-60-PB)
Speaker E60

Features:

Compact size: Front panel is the size of a typical double gang mid- size wall plate
Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424)
Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-60-SS Stainless Steel faceplate)
Enhanced Weather Protection (EWP) available
Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
Blue LED helps locate the push button, indicate ringing and off-hook
Telephone line powered
Microphone and speaker volume controls
Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
Selectable auto answer feature for monitoring
Programmable VOX (mic/speaker) switching speed

Specifications:

Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1A Talk Battery Booster (see Fax Back Document 630).
Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
Operating Temperature: -34 C to 65 C (-30 F to 150 F)
Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity
Speaker Volume: Approximately 62db maximum @ 1m
Ring Voltage: 25V AC RMS minimum (for auto answer)
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors

Part Number: E-60-BK-EWP, E-60-BN-EWP, E-60-PB-EWP
http://www.northernbellnetworks.come-60-pb.html
$0.00

Call Us at 1-888-945-1003 for availability

Product Description

Speaker E60

Features:

Compact size: Front panel is the size of a typical double gang mid- size wall plate
Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424)
Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-60-SS Stainless Steel faceplate)
Enhanced Weather Protection (EWP) available
Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
Blue LED helps locate the push button, indicate ringing and off-hook
Telephone line powered
Microphone and speaker volume controls
Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
Selectable auto answer feature for monitoring
Programmable VOX (mic/speaker) switching speed

Specifications:

Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1A Talk Battery Booster (see Fax Back Document 630).
Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
Operating Temperature: -34 C to 65 C (-30 F to 150 F)
Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity
Speaker Volume: Approximately 62db maximum @ 1m
Ring Voltage: 25V AC RMS minimum (for auto answer)
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors

Part Number: E-60-BK-EWP, E-60-BN-EWP, E-60-PB-EWP

Join our mailing list today and receive all the latest updates and offers!

Related Items in Enhanced Weather Protection