NetGear FSM7352S ProSafe 48-Port L3 Managed Stackable Switch

NetGear FSM7352S ProSafe 48-Port L3 Managed Stackable Switch

NETGEAR's low-cost, stackable, Fast Ethernet switches deliver maximum throughput and flexibility where you need it - to high-density workgroups at the edge of the network, or in the backbone of small networks. The ProSafe FSM7328S and FSM7352S are managed 24-port and 48-port switches with auto-sensing 10/100 ports and four 10/100/1000 ports. This enables fiber connectivity through four hot-swappable small form-factor pluggable (SFP) Gigabit interfaces. The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, their 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches.

Dynamic Layer 3 switching ensures reliable routing between VLANs and network segmentation where and when you need it, at no additional cost. Plus, convenient front-panel stacking via standard Gigabit Ethernet interfaces provides expandability to meet your growing network's needs.

Robust security features include IEEE 802.1x port-based authentication and access control lists, ensuring that only authorized users can access your network. Secure management of the switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secure Shell (SSH) for command-line sessions. Additionally, multiple switches can be securely managed via SNMPv3 with NETGEAR's ProSafe Network Management Software NMS100. For workgroup deployments in cost-sensitive organizations that require layer 3 switching, the flexibility of stacking and additional Gigabit capability, NETGEAR's ProSafe 10/100 Layer 3 Stackable switches deliver the ideal access-edge solution.

In desktop switching environments, wire-speed performance with full QoS control for all 10/100 interfaces is critical. The 4 Gigabit Ethernet combo interfaces provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network.

Simplify and reduce IT staff workload and mean time to repair with intuitive, GUI-based device configuration, and an industry-standard command-line interface (CLI). New front-panel stacking capabilities allow you to build a single-IP manageable device with up to eight switches utilizing standard copper or fiber Gigabit Ethernet interfaces and cables. Dynamic RIPv1/v2 standardsbased routing protocols ensure ease of setup, and eliminate the need to maintain static routing tables, reducing ongoing maintenance costs.

With their high-value price point, flexible design, and reduced maintenance requirements, NETGEAR's ProSafe 10/100 Layer 3 Stackable Switch solutions yield a high return on investment, and are ideal for delivering highly reliable, converged voice, video, and data services over a single network infrastructure.

Specifications

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3z 1000BASE-SX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3x flow control

• IEEE 802.1Q static VLAN (up to 512)
• IEEE 802.1p Class of Service (CoS)
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1v protocol VLAN port VLAN
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1s Multiple Spanning Tree Protocol
• IEEE 802.3ad link aggregation (LACP)
• IEEE 802.1x port access authentication
• IGMP v1, v2 snooping support
• Network storm protection, including broadcast, multicast and unicast traffic
• Static multicast filtering
• Port locking
• Ingress rate limit in 1Kbps increments
• GARP/GVRP/GMRP

• VLAN routing
• Port-based routing
• RIP v1/v2 (RFC 1058, 2453)
• Access Control Lists - MAC, IP, TCP
• ACLs - 1,024 global
• COS
• DiffServ QoS (RFC 2998)
• DNS caching
• DHCP/BOOTP relay - primary and backup (RFC3046, option 82)

• SNMP v1, v2c, v3 with multiple IP addresses
• RFC 1157, 1901-1910, 2574, 2575
• RFC 768 UDP
• UDP relay
• RFC 854-859telnet
• RFC 951 BOOTP
• RFC 1027 Proxy ARP
• RFC 1213 MIB II
• RFC 1757 RMON groups 1,2,3, and 9
• RFC 1215 SNMP traps
• RFC 1493 bridge MIB
• RFC 1643Ethernet interface MIB
• RFC 1534 DHCP and BOOTP interoperation
• RFC 2030 Simple Network Time Protocol (SNTP)
• RFC 2131, 2132 DHCP and BOOTP
• DHCP relay 9with backup servers
• FC 2236 IGMP v2
• RFC 2865 RADIUS (both switch and management access)
• RFC 2866 RADIUS accounting
• RFC 3376 - IGMP v3
• Private enterprise MIB
• Port mirroring support (many-to-one)
• IGMP querier
• GARP/GVRP/GMRP
• SYSLOG
• Firmware upgrade via TFTP or HTTP
• Port description
• RFC 1519 CIDR
• Proxy ARP
• DNS lookup

• Manage up to 48 fully managed switched
• Feature can be used with the following models:
• FSM726E, FSM7226RS, FSM7250RS
• FSM7328S, FSM7352S, FSM7352S, FSM7328PS, FSM7352PS
• GSM7224R, GSM7248R
• GSM7328S, GSM7328FS, GSM7352S

• Command-line interface (CLI) via console port
• Web-based management via embedded HTTP server protected with Secured Sockets Layer
• (SSLv3) or Transport Layer Security (TLS v1)
• Telnet remote login (5 sessions) securable with Secure Shell (SSH v1.5, v2)

• Per port: Speed, link, activity
• Per device: Power, fan status, stack ID, master
• Physical Interfaces
• 24 or 48 RJ-45 connectors for 10BASE-T, 100BASE-TX (Auto Uplink and auto negotiate on all ports)
• 4 1000Base-T with optional SFP connectors for fiber connection
• RS-232 console port

• Forwarding modes: Store and forward
• Bandwidth:
• FSM7328S: 12.8 Gbps; 8.5 Mpps
• FSM7352S: 17.6 Gbps; 13 Mpps
• Switch latency: Less than 80 microseconds for 64-byte frames
• System memory: 128 MB
• Packet buffer memory: 32 MB
• Code storage (Flash): 16 MB
• Address database size: 16,384 media access control
• (MAC) addresses
• Number of VLANs: 512 (1-4096)
• Number of trunks: 6
• Number of queues: 8
• Number of routes: 128
• Jumbo frame support: up to 9K packet size

• Forwarding modes: Store and forward
• Bandwidth:
• FSM7328S: 12.8 Gbps; 8.5 Mpps
• FSM7352S: 17.6 Gbps; 13 Mpps
• Switch latency: Less than 80 microseconds for 64-byte frames
• System memory: 128 MB
• Packet buffer memory: 32 MB
• Code storage (Flash): 16 MB
• Address database size: 16,384 media access control
• (MAC) addresses
• Number of VLANs: 512 (1-4096)
• Number of trunks: 6
• Number of queues: 8
• Number of routes: 128
• Jumbo frame support: up to 9K packet size

• 1000BASE-SX SFP GBIC (AGM731F)
• 1000BASE-LX SPF GBIC (AGM732F)
• NMS100 Network Management

• PMB0332

• PRR0332-100