Viking DVA-2WA Promotion On Hold Announcer

Viking
Mass Notifications|Alarm Dialers
Viking DVA-2WA Promotion On Hold Announcer (DVA-2WA)

DVA2WA Voice Announcers

Features

7.5 minutes of user recordable memory
Select from user recorded messages or four pre-recorded on-hold pacifier messages
Three playback options: on demand, continuous, and timed intervals
Non-volatile memory (no batteries required)
Built-in 2 watt amplifier to connect directly to speakers
Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
600 ohm audio output for high wattage amplifiers
Multiple message capabilities (total number of messages only limited to maximum record time)
AGC (Automatic Gain Control) for trouble free recording
Auxiliary audio (MOH) input for between message background music
Remote trigger input for on-demand playback from a remote contact closure
Press and hold play mode
Status LED for record and playback indication
Master and auxiliary input volume controls
I.O. communications port (allows only one DVA-2WA to announce at a time)
Made in the USA

Specifications

Power: 120V AC/12V DC, 500mA adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity
Frequency Response: 100-3.4KHz
Sampling Rate: 64K (equivalent) User Message
Length: 7.5 minutes maximum
Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
Speaker Output Power: 2 watt peak
Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66
Ohms: (3) 8-Ohm speaker

http://www.northernbellnetworks.comdva-2wa.html
$0.00

Call Us at 1-888-945-1003 for availability

Product Description

DVA2WA Voice Announcers

Features

7.5 minutes of user recordable memory
Select from user recorded messages or four pre-recorded on-hold pacifier messages
Three playback options: on demand, continuous, and timed intervals
Non-volatile memory (no batteries required)
Built-in 2 watt amplifier to connect directly to speakers
Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
600 ohm audio output for high wattage amplifiers
Multiple message capabilities (total number of messages only limited to maximum record time)
AGC (Automatic Gain Control) for trouble free recording
Auxiliary audio (MOH) input for between message background music
Remote trigger input for on-demand playback from a remote contact closure
Press and hold play mode
Status LED for record and playback indication
Master and auxiliary input volume controls
I.O. communications port (allows only one DVA-2WA to announce at a time)
Made in the USA

Specifications

Power: 120V AC/12V DC, 500mA adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity
Frequency Response: 100-3.4KHz
Sampling Rate: 64K (equivalent) User Message
Length: 7.5 minutes maximum
Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
Speaker Output Power: 2 watt peak
Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66
Ohms: (3) 8-Ohm speaker

Join our mailing list today and receive all the latest updates and offers!

Related Items in Mass Notifications|Alarm Dialers