Viking Mass Notifications|Alarm Dialers Viking K-6000-DVA Voice Message Delivery System (K-6000-DVA) Viking K6000-DVA Voice Message Delivery System
Features
Non-volatile memory (no batteries required)
Stores up to 1000 14-digit numbers
Up to 6 groups
8 minutes of total record time total
Eight normally open inputs for push buttons to activate groups 1-6, “All Call” or “Stop”
Programmable ring delay for remote programming
Call progress detection determins when answered
Programmable ringback limit for call progress (1-8)
Programmable “retry” limit (1-9) for calls that are busy or don’t answer
Remote security and access codes
Local or remote programming and recording
Program from your PC’s USB or RS-232 port (RS-232 to USB adapter included)
Up to 8 K-6000-DVAs can be connected to 1 PC
Master/Slave mode for multiple levels of K-6000-DVAs
Compatible with the RC-2A and RC-3 remote DTMF controllers
Line level input for loading pre-recorded messages into the unit
Activity reports available
Specifications
Power: 120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
Environmental: 0 C to 32C (32 F to 90 F) with 5% to 95% noncondensing humidity
Talk Battery: 12V DC
Touch Tone Dialing: 120 ms on/off, 50 ms on/off
CPC Detection Time: 320 ms minimum
Message Record Time: 8 minutes
Sampling Rate: 64 K (equivalent)
Input Detection Time: 80 ms
Connections: (1) RJ11 jack for telco connection, (2) 3.5mm jacks for 600-ohm audio output and record in, (1) 9 pin RS-232 for PC connection, (1) 12 position screw terminal block for inputs
Eight normally open inputs for push buttons to activate groups 1-6, “All Call” or “Stop”
Programmable ring delay for remote programming
Call progress detection determins when answered
Programmable ringback limit for call progress (1-8)
Programmable “retry” limit (1-9) for calls that are busy or don’t answer
Remote security and access codes
Local or remote programming and recording
Program from your PC’s USB or RS-232 port (RS-232 to USB adapter included)
Up to 8 K-6000-DVAs can be connected to 1 PC
Master/Slave mode for multiple levels of K-6000-DVAs
Compatible with the RC-2A and RC-3 remote DTMF controllers
Line level input for loading pre-recorded messages into the unit
Activity reports available
Specifications
Power: 120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
Environmental: 0 C to 32C (32 F to 90 F) with 5% to 95% noncondensing humidity
Talk Battery: 12V DC
Touch Tone Dialing: 120 ms on/off, 50 ms on/off
CPC Detection Time: 320 ms minimum
Message Record Time: 8 minutes
Sampling Rate: 64 K (equivalent)
Input Detection Time: 80 ms
Connections: (1) RJ11 jack for telco connection, (2) 3.5mm jacks for 600-ohm audio output and record in, (1) 9 pin RS-232 for PC connection, (1) 12 position screw terminal block for inputs